18
Inserting the combination shelf, baking tray and gen-
eral purpose tray
Inserting the baking tray and general
purpose tray:
The trays have a little bulge on the left
and right edges. These act as an
anti-tip
device
and must always be located to-
wards the rear when inserting the tray.
Insert trays in the desired shelf positions.
3
To make it easier to insert a tray at a different shelf position, set the tray in
the rails at the desired position, push in as far as it will go, then let it down.
Inserting/Removing the Fat Filter
The fat filter protects the rear wall heating
element against splashes of fat when
roasting.
Inserting oven shelves:
Insert the shelf at the desired
position.
Inserting the fat filter
Holding the fat filter by the tab, in-
sert the two retainers into the
opening on the rear wall of the
oven (fan opening) from the top
downwards.
Removing the fat filter
Take hold of the tab on the fat fil-
ter and remove by pulling up-
wards.