11
Replacing the Oven Light
FO 0287
Disconnect the appliance.
If the oven bulb needs replacing, it must comply with the
following specifications:
- Electric power: 15W,
- Electric rate: 230-240 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from the
electrical supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the
new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
F
Something not working
SYMPTOM
n
The oven does not come on
n
The oven temperature light does not come on
n
The oven light does not come on
n
It takes too long to finish the dishes, or they are
cooked too fast.
n
Steam and condensation settle on the food and
the oven cavity.
n
The end of cooking programmer does not work
n
The oven fan is noisy
SOLUTION
u
Check the oven is in manual operation and that both a
cooking function and temperature have been selected.
u
Check the oven is wired in properly, and the socket
switch or the switch from the mains supply to the oven
are ON.
u
Select a temperature with the thermostat control knob
u
Select a function with the oven function control knob.
u
Select a function with the oven function control knob.
u
Check the light bulb, and replace it if necessary (see
"Replacing the Oven Light")
u
The temperature may need adjusting
u
Refer to the contents of this booklet, especially to the
chapter Using the Oven.
u
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed.
u
Check the instructions for the programmer.
u
Check that shelves and bakeware are not vibrating in
contact with the oven back panel.
If the appliance is not working correctly, please carry out the following checks before contacting your local Service
Force Centre.
