22
Mantenimiento periódico
Limpie la superficie externa con un trapo húmedo, luego seque la superficie. Use un detergente neutro para
limpiar cualquier mancha.
Si instala un neutralizador de condensación, necesitará reemplazar el agente neutralizador periódicamente.
Vea las instruccones que vienen con el neutralizador para ver los intervalos sugeridos de reemplazo.
• No use benceno ni detergentes a base de grasa o aceite para limpiar el control remoto;
Pueden ocasionar una deformación.
• El control remoto es resistente al agua pero no a prueba de agua. Manténgalo lo más seco posible.
Mantenimiento regular
Inspección periódica
Equipo
Control remoto
Limpie la superficie con un trapo húmedo.
Para evitar quemaduras, apague y espere
hasta que el equipo esté frío antes de hacer el
mantenimiento.
AVISO
Asegúrese de
hacer.
Revise
Preste atención a la
ropa, periódicos, leña,
kerosene, aerosoles
y otros materiales
combustibles que estén
cerca del calefón o de la
rejilla de extracción.
Preste atención a los
sonido raros durante el
funcionamiento.
Preste atención a la
apariencia externa,
decoloración o defectos
que no sean normales.
Preste atención a goteras
del equipo y de las cañerías.
Preste atención al
polvo y hollín en el
extractor o la rejilla de
extracción.
Preste atención al buen
funcionamiento de la
válvula de descarga de
presión.
Revise
Revise
Revise
Revise
Revise
(Ej. EN18WI30LS)
Preste atención a
bloqueos en el tubo
de desagüe.
Revise
Revise
Preste atención a manchas o
bloqueos con polvo, kerosene,
etc. en el conducto de
ventilación.
Si está bloqueado, quite lo que
lo bloquea con una aspiradora
o con una toalla húmeda.
[Cuando el aire de combustión
viene del interior]
* No quite permanente el filtro de aire.
conducto de
vetilación