Electrolux EMS3082CR, Инструкция по эксплуатации

Страница: 6 / 17

9
8
To Cook with Convection:
1. Touch button once.
2. Turn the DIAL to choose a desired temperature.
3. Touch the button once. 4. Turn the DIAL to enter cooking time.
5. Touch START button.
To Preheat and Cook with Convection:
Your oven can be programmed to combine preheating and convection cooking operations.
1. Touch button once.
2. Turn the DIAL to select desired temperature.
3. Touch START button. When the oven reaches the programmed temperature, beeps sound to remind user to
the door and place food into the oven..
4. Open the door and place container of food at the center of the turntable.
5. Turn the DIAL to enter cooking time. 6. Touch START button.
NOTE: The maximum preheat time is 30 minutes, and the preheat time cannot be set. When the
temperature reaches the preheat temperature, it will keep for 30 minutes. If you don’t open the oven door
within the 30 minutes, the system will stop automatically.
Microwave + Convection Cooking
This oven has two different combination cooking temperatures 170
° C
+ HI and 200
° C
+ HI. It’s easy to cook with
both convection heat and microwave automatically.
1. Touch COMBI button repeatedly to select desired combination temperature.
2. Turn the DIAL to enter cooking time. The longest cooking time is 95 minutes.
3. Touch START button.
NOTE: The new combination power level will remain whenever you touch COMBI until you reset it or cut the power.
Multistage Cooking
First stage
Defrost / Microwave cooking / Grill cooking / Convection cooking (without
preheating) / Mic Convection cooking
Second stage
Microwave cooking / Grill cooking /Steam menu/
Convection cooking (without preheating) / Mic Convection cooking
1. Set the first stage cooking program. DO NOT TOUCH START.
2. Set the second stage cooking program.
3. Touch START button.
NOTE: Quick start, auto menu and convection cooking with preheat cannot be set in multistage cooking program.
If you set weight defrost in the second stage, when the oven start cooking, it will auto adjust to the first stage.
Time Defrost
The longest defrosting time is 95 minutes.
1. Touch DEFROST button repeatedly to select time defrost.
2. Enter desired defrosting time by turning DIAL.
3. Touch START.
NOTE: After two-thirds of the defrosting time the system will pause and sound beeps to remind user to
turn food over, and then press START button to resume.
Weight Defrost
The defrosting time and power level are adjusted automatically once the weight is programmed. The range
weight of frozen food varies between
100g and 1000g.
1. Touch DEFROST button repeatedly to select weight defrost.
2. Turn the DIAL to enter food weight.
3. Touch START button to start.
NOTE: During defrosting program, the system will pause and sound beeps to remind user to turn food over,and
then press START button to resume.
The new defrosting way will remain whenever you touch DEFROST until you reset it or cut the power.
Ferment
It helps you to ferment food easily. The default setting is working at 50
°
C temperature.
1. Place a larger and covered container with food into the oven.
2. Touch FERMENT button once.
3. Turn the DIAL to enter desire time. (You can set the time from 60 minutes to 95 minutes.)
4. Press START button.
Setting Child Lock
The lock prevents unsupervised operation by children.

To set the child lock: In standby mode, press STOP/ CLEAR button for 3 seconds, then a beep will
sound. In the lock mode, the oven can’t be operated.

To cancel the child lock: Press STOP/ CLEAR button for 3 seconds, then a beep will sound, and the
oven can be operated.
Automatic Protection Mechanism
High Temperature Protection: While entering into super high temperature protection status, the system
sounds beeps and the display shows “E01”, after troubleshooting, press STOP/CLEAR button to return
normal condition. Please open the door to cool the oven cavity or call for consumer service to check.
Low Temperature Protection: While entering into super low temperature protection status, the system
sounds beeps and the display shows “E02”, after troubleshooting, press STOP/CLEAR button to return
normal condition. Please call for consumer service to check.
Sensor Malfunction Protection: When the sensor is short circuited, the system enters into protection
mode and sound beeps, the display shows “E03”, after troubleshooting, press STOP/CLEAR button to
return normal condition. Please call for consumer service to check and replace the faulty sensor.
Auto Menu
It is not necessary to program the cooking time and power level.
1. In standby mode, touch button once
，
the display will show ”A-1”.
2. Turn the DIAL to select menu code.
3. Touch WEIGHT button once.
4. Turn the DIAL to select the weight or amount of food.
5. Touch START button.
Auto cook menus:
Code Menu
Note:

For menus A-1 to A-4, A-6 and A-11 during
cooking, the system will pause and sound
beeps to remind user to turn food over for
uniform cooking, then close the door and press
START button to resume.

The result of auto cooking depends on factors
such as fluctuation of voltage, the shape and
size of food, your personal preference as to
the doneness of certain foods and even how
well you happen to place food in the oven. If
you find the result at any rate not quite
satisfactory, please adjust the cooking time a
little bit accordingly.

The microwave will remember the last
AUTOMENU code until you reset it or cut the
power. Suppose you select A-8 this time,
and start the function. The next time you
touch
, the display will show A-8 again.
A-1 Grill Chicken (g)
A-2 Roast beef/lamb (g)
A-3 Roast pork (g)
A-4 Baked Fish (g)
A-5 Baked Potato (230g/each)
A-6 Frozen Pizza (g)
A-7 Pasta (g)
A-8 Rice (g)
A-9 Congee/Porridge (g)
A-10 Cake (475g)
A-11 Toast (piece)
A-12 Popcorn (100g)
A-13 Dim Sum (reheat) (g)
A-14 Beverages (200ml/each)