Electrolux ELAY10DGAV8, Инструкция по эксплуатации

Страница: 10 / 31

10 www.electrolux.com
Precautions when connecting
the water supply hoses
If there is only one water tap in the place
where you want to install your washing
machine, make sure that this is a cold
water supply and connect it to the intake
marked COLD, otherwise your washing
machine will indicate that there is a fault
and will not work, since your washing
machine only uses cold water for rinsing.
NOTE 1: “With regard to equipment
connected to the water supply using
removable hoses, the new hoses supplied
with the equipment must be used.
Used hoses must not be used”.
NOTE 2: Your washing machine has a red
stopper indicating the hot water intake.
This stopper must be removed when you
connect the hot water hose and if this
option is not being used then the stopper
should be left in place.
Preparations
Electrical connection
The washing machine must be earthed, so
make sure that the plug has three prongs
because otherwise you might experience
an electric shock if there is no insulation.
For the same reason DO NOT USE
extension leads with 2 conductors.
Cold
water tap
Hot water tap
Hot
water
inlet
Cold
water
inlet
Only one plug
must be used for
the connection.
multiple connections
with your washing
machine.