manualshive.com logo in svg

Electrolux EKV 5604, Инструкция

Поделиться
Скачать
Electrolux EKV 5604 Скачать руководство пользователя страница 14

13

LED timer with time control

The operation of this timer is done via 3 buttons.
The functions of the buttons are:

, 

 Time setting knobs

  Mode button

With this arrangement it is possible to select the
following four functions:

    Operation period

    Operation stop

    Minute minder

    Time-of-day

Time of day

When connected to mains supply the display
shows 12.00 o'clock and the LED   flashes. As
long as it is flashing, it is possible to adjust the
time via the plus 

 

and minus 

 

button.

Once the time is adjusted it is stored approx. 5
seconds after the last operation, the LED 
goes dark again.
It is possible to adjust the time-of-day any time it
is required. To do this, press the mode button
until 

 flashes, then the time-of-day can be

adjusted.

Minute minder (interval time)

In order to set the interval time, the “Mode”
button has to be pressed repeatedly until LED

 is flashing. Then the interval time can be set

by using the plus and minus buttons. After
setting the interval time, it remains displayed
and the LED 

, which was flashing before, is

now illuminated steadily. After the interval time
has run down, the alarm signal sounds (2
beeps) and the LED 

 is flashing again.

Pressing any of the buttons stops the signal and
the flashing, the LED goes dark and the display
reverts to the time-of-day.

Operation period

In order to set an operation period, the mode
button has to be pressed repeatedly until the
LED 

 is flashing. Then the desired operation

period (time frame between 0.01h and 10.00h)
can be set using the plus and minus buttons.
Once adjusted, it will be stored after approx. 5
seconds, and the LED 

 remains illuminated

steadily. The display reverts to the time-of-day.
As soon as the operation period has run down,
the relay opens and the alarm signal sounds (4
beeps) and the LED 

 is flashing again.

Pressing any of the buttons stops the signal and
the flashing, the LED goes dark and the relay
closes again.

Operation stop

In order to set an operation stop, the mode
button has to be pressed repeatedly until the
LED 

 is flashing. Then the desired operation

stop (time frame between time-of-day + 1 minute
and time-of-day minus 1 minute) can be set
using the plus and minus buttons. Once
adjusted it will be stored after approx. 5
seconds, and the LED 

 remains illuminated

steadily. The display reverts to the time-of-day.
As soon as the operation stop has been
reached, the relay opens and the alarm signal
sounds (4 beeps) and the LED 

 is flashing.

Pressing any of the buttons stops the signal and
the flashing, the LED goes dark and the relay
closes again.

Содержание EKV 5604






















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды