Electrolux EKK61500O, Руководство пользователя

Страница: 28 / 60

ones which are necessary for the type
of gas you use.
4. Assemble the parts, follow the same
procedure backwards.
5. Replace the rating plate (it is near the
gas supply pipe) with the one for the
new type of gas supply. You can find
this plate in the package supplied with
the appliance.
If the supply gas pressure is changeable or
different from the necessary pressure, you
must fit an applicable pressure adjuster on
the gas supply pipe.
ADJUSTMENT OF MINIMUM
LEVEL
To adjust the minimum level of the burners:
1. Light the burner.
2. Turn the knob on the minimum posi-
tion.
3. Remove the knob.
4. With a thin screwdriver, adjust the by-
pass screw position (A).
A
• If you change from natural gas to liquid
gas, fully tighten the adjustment screw
in.
• If you change from liquid gas to natural
gas, undo the by-pass screw approxi-
mately 1/4 of a turn.
WARNING!
Make sure the flame does not go
out when you quickly turn the knob
from the maximum position to the
minimum position.
LEVELLING
Use small feet on the bottom of appliance
to set the appliance top surface level with
other surfaces.
ELECTRICAL INSTALLATION
WARNING!
Only a qualified and competent
person must do the electrical in-
stallation.
The manufacturer is not responsi-
ble if you do not follow safety pre-
cautions from chapter "Safety infor-
mation".
This appliance is supplied with a main plug
and a main cable.
The power cable must not touch
the part of the appliance shown in
the illustration.
28 www.electrolux.com