24 www.electrolux.com
Replacing the electrical
components
• The rear protection will have to be
removed in order to change the
electrical heating elements, spit motor,
terminal board and power cable.
• If you have to change the power
cable (see the cross section
on table in the “Technical
information” section), always
keep the earth wire longer than
the phase wires and, in addition,
follow all the instructions given
in the “Electrical connection”
paragraph.
• To change the oven lamp see the
instructions given
“Replacing the
oven lamp”
paragraph.
• To change the spark generator, the
spark electrodes and the lamp holder
the work top has to be removed as
indicated in paragraph “Replacing the
taps”.
• To change the lamp-holder force the
tabs of blockage and take the lamp-
holder toward the inside of the oven.
• To change the eventual programming
accessory, the thermostat,
commutators, the switchs and the
microswitchs, remove the front panel as
indicated in paragraph
“Replacing the
taps”.
6.
TECHNICAL INFORMATION
Outside cooker dimensions
MODEL
height
1
/mm
height
2
/mm
width
3
/mm
depth
4
/mm
100 x 60
910 ÷ 920
970 ÷ 980
1000
600