Electrolux EKI51300OX, Руководство пользователя

Страница: 24 / 32

agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
12.2 Stainless steel or
aluminium appliances
Clean the oven door with a
damp cloth or sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids
or abrasive materials as they
can damage the oven
surface. Clean the oven
control panel with the same
precautions.
12.3 Removing and installing
the oven glass panels
You can remove the internal glass
panels to clean it. The number of glass
panels is different for different models.
WARNING!
Keep the oven door slightly
open during the cleaning
process. When you open it
fully it may accidentally close
causing potential damage.
WARNING!
Do not use the appliance
without the glass panels.
1. Open the door until it is at an angle of
approximately 30°. The door stands
alone when slightly open.
30°
2. Hold the door trim (B) at the top edge
of the door on both sides and push
inwards to release the clip seal.
1
2
B
3. Pull the door trim to the front to
remove it.
WARNING!
When you take out the
glass panels the oven
door tries to close.
4. Hold the top edge of the door glass
panels and pull them up one by one.
5. Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is complete, install
the glass panels and the oven door. Do
the above steps in the opposite
sequence. Install the smaller panel first,
then the larger.
CAUTION!
The screen with a printing on
the inner glass panel must
face the inner side of the
door.
CAUTION!
Make sure that after
installation the surface of the
frame of the glass panel on
the screen with a printing is
not rough when you touch it.
CAUTION!
Make sure that you install
the internal glass panel in
the appropriate seats.
12.4 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
www.electrolux.com 24