Electrolux EKG801100, Руководство пользователя

Страница: 7 / 24

electrolux 7
Cooking in the Oven
Traditional cooking is made by natural
convection; the heated air circulates on the
principle of ascending and descending
draughts. It is necessary to pre-heat the
oven.
All cookers vary and it is important to be
aware of the approximate cooking
temperatures before you use the cooker.
The chart shows the gas mark temperatures
together with the approximate equivalent
temperatures in
o
C.
It may be necessary to adjust the
temperature to suit your individual
requirements. Only experience will enable
you to determine the correct setting for
your personal requirements.
Gas Mark Temperature
o
C
1 155
2 173
3 192
4 210
5 229
6 248
7 266
8 285
Using the Grill
When grilling, the accessible parts of
the appliance are hot and the appliance
should not be left unattended. Take
care that children do not play near it.
While the grill is operating leave the
oven door half open and put the grill
deflector “A” into place.
During use the appliance becomes
hot. Care should be taken to avoid
touching heating elements inside the
oven.
Caution: Accesible parts may be hot when
the grill is in use. Young children should be
kept away.
Heat comes from the top of the oven. It is
suitable for grilling meat (beef bacon, pork
bacon …) that remains tender, for toast or
to brown already cooked.
A
Grill burner ignition
Attention: when turning on the grill
burner the oven door has to be
opened
.
•
Open the oven door assemble the
protective screen “A” in its place
•
Push the electronic ignition knob for
obtaining sparkles. Keep it pushed till
turning up of the flame (1 spark / second).
•
In the same time, push and turn the
control knob to the right to the “grill
symbol” and keep the control knob
pressed until the gas ignites (the sparker
generator produce a spark that lights the
burner).
•
Upon ignition, keep the knob pressed for
approximately 10 seconds (until the safety
valve automatically keeps the burner lit)
If for any reason the flame should extinguish
turn the control knob to the " " position,
leave for at least 1 minute and then re-
ignite.