![Electrolux EKC 6190 Скачать руководство пользователя страница 12](http://html.mh-extra.com/html/electrolux/ekc-6190/ekc-6190_instruction-book_91076012.webp)
The ceramic hob
12
Automatic turning-off
For safety reasons, the power supply to the hob cuts out
after a certain time (1.5 to 6 hours). The higher the heat
of the hotplate, the earlier the power is cut:
Once the time for one hotplate has expired, all hot-
plates in use then cut out. A line appears in the control
window for these hotplates until you have reset the
controls.
Choosing suitable pans
Greater attention needs to be paid to the type and con-
dition of pans used on ceramic hobs than it does with
radiant hobs. Here are some points to remember:
•
Check the pan bases. Bases which are convex (curve
outwards) will tend to spin on the hob and will not
conduct heat very well.
• Aluminium is a good conductor of heat, but it
can leave silver-coloured stains on the hob. You
can remove these stains with the hob cleaner
supplied with the cooker.
• Glass vessels and enamelled bases with a rough
pattern will – if pulled back and forth across the
surface – cause greater wear on the hob than
other materials.
To save you time and therefore energy, the contact
surface of the pan base should:
•
be at least as large as the hotplate. If the base is
smaller than the hotplate, any spillages are quite
likely to burn onto the hob.
•
be smooth or have a fine pattern
•
be flat. It takes longer to heat a pan with a base
which curves in or outwards too much.
When you are buying new pans, it is advisable to
choose stainless steel ones with sandwich-type bases
(i.e. layers of different metals).
HEAT
POSITIONS
1–2
3–4
5
6–9
Turning off
approx. hours
6
5
4
1,5
aluminium
Содержание EKC 6190
Страница 1: ...cooker INSTRUCTION BOOK EKC 6190 821 05 76 02 ...
Страница 35: ......