background image

electrolux 

3

Farm houses

By clients in hotels, motels, and other 
residential type of environments

Bed and breakfast type of environments

The appliance is designed and made to 
supply water and ice. Other uses are 
considered improper. This appliance is not 
suitable for commercial use. The 
manufacturer is not liable for damage 
deriving from improper use of the 
appliance.

Electrical safety

Warning

 The appliance must be 

earthed in compliance with legislation. 
Electrical connection must be carried 
out by qualified technicians following 
the instructions

Warning

 This is an electrical 

appliance, it is therefore important to 
respect the following safety warnings:

Never touch the plug with wet hands.

Make sure the socket is freely 
accessible at all times, enabling the 
appliance to be unplugged when 
necessary.

If the appliance is faulty, do not attempt 
to repair it. Turn it off using the power 
switch, unplug from the main socket and 
contact your local Service Force Centre.

Check that the main power supply voltage 
corresponds to the value indicated on the 
rating plate on the left side of the 
appliance. Connect the appliance to an 
efficiently earthed and correctly installed 
socket. If the power socket does not 
match the plug on the appliance, have the 
socket replaced with a suitable type by a 
qualified professional. Do not use multiple 
sockets or extensions.

During installation and Use

Warning 

Move the appliance carefully 

in order not to damage components of 
the refrigeration circuit and to avoid 
gas leaks

Warning 

Avoid prolonged exposure of 

the appliance to direct sunlight

Warning 

When installing the 

appliance do not over bend hoses

After removing the packaging, make sure 
the product is complete and undamaged 
and that all components are present.

Do not use the appliance if it is visibly 
damaged. Contact your local Service 
Force Centre.

Installation must be carried out by 
qualified professional in compliance with 
legislation in force in the country of 
installation.

The packing elements (plastic bags, 
polystyrene foam, etc.) should be kept 
out of reach of children.

Do not install the appliance in rooms 
where the temperature may raise up to 
35°C or above.

Surface treatment

Warning

 Before performing any 

washing operation, the appliance 
must be switched off and unplugged 
from the power supply

Warning 

Do not use solvents or 

abrasive detergents.
A soft damp cloth will suffice

Environmental protection

Electrical appliances must not be disposed 
of as household waste. Appliances with 
this symbol   are covered by European 
Directive 2002/96/EC. All unused electric 
and electronic appliances must be 
disposed of separately from household 
waste and taken to country-authorised 
special centres.

Содержание EIW63810X





















Отзывы: