background image

12

Air Filter & Luxury Design

TM

 Lighting

Luxury Design™ Lighting

The interior cabinet lighting features LED 

lights that gradually ramp up in intensity 

after the door is opened.

To replace an LED:

1.  Unplug the electrical cord or switch 

OFF the power supply breaker.

2.  Push down on the LED cover and then 

pull away from the cabinet interior.

3.  From the inside of the LED cover, 

remove the wire harness connector 

by pressing on the latch with a small 

flat-bladed screwdriver. Pull the wire 

harness connector out of the LED.

4.  Replace with a new LED and install in 

the reverse order.

Push on 

underside of 

connector to 

release latch

Remove wire 

harness 

connection

Pure Advantage™ Air 

Filter

Your new Pure Advantage

TM

 air filter is 

located inside one of the 2-Liter Door Bins. 

The air filter cover is located on the upper 

right side of the control box. In general, 

you should change the air filter with 

Part Number “EAFCBF” every 6 months 

to ensure optimal filtering of freezer 

odors. The replacement air filter can be 

purchased on the Electrolux website 

(http://www.electroluxappliances.com) 

or call toll free in the U.S. and Canada: 

1-877-4ELECTROLUX (1-877-435-3287). 

Your electronic control is equipped with a 

Change Filter Indicator to remind you to 

change your filter. See “Replace Air Filter”.

To Install Or Replace The Air 

Filter

•  Pull down on the front of the Pure 

Advantage™ air filter cover. This 

releases the hinged bottom cover to 

drop open.

•  Remove the old filter and discard it.
•  Unpackage the new filter and place it 

inside the hinged bottom cover of  

the housing.

•  Push the hinged bottom cover 

upward until the tab snaps into 

closed position.

replace air filter

hold to reset

press & hold

air

filter

temp

mode

alarm

off

control

lock

Open air filter cover

Air Filter

Remove air filter

WARNING

Unplug the unit or switch the breaker 

that supplies power to the unit to the off 

position before changing an LED light.

Содержание EI32AR80QS

























Отзывы: