MICROWAVE OVEN INSTALLATION INSTRUCTIONS
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
The electrical requirements for this oven are 115-120 volts AC, 15 amps or larger.
Printed in United States
IMPORTANT - PLEASE READ AND FOLLOW
• Before beginning, please read these instructions completely and carefully.
• Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet before installing the built-in trim kit.
Remove the turntable from the oven cavity.
• Because the kit includes metal parts, caution should be used in handling and installation to avoid the possibility of injury.
• Do not remove permanently affixed labels, warnings, or plates from the product. This may void the warranty.
• Please observe all local and national codes and ordinances.
•
The installer should leave these instructions with the consumer who should retain for local inspector’s use and for
future reference.
PARTS INCLUDED IN THE KITS
1) FRONT FRamE aSSEmBLy
QTy 1
2) BOTTOm DUCT aSSEmBLy
QTy 1
3) SCREw a (1
³₁₆
" LENGTH)
QTy 2
4) SCREw B (1
³₄
" LENGTH)
QTy 4
MICROWAVE OVEN INSTALLATION INSTRUCTIONS
#490_EHP VBA installation.indd 1
1/10/08 1:09:37 PM
