Electrolux EI23CS35KB, Инструкция по использованию и уходу

Страница: 39 / 44

39
Before You Call
Temperatures Are Too Warm
Concern Cause Solution
Freezer/
Refrigerator
temperature is too
warm.
•
Doors are opened too
frequently or too long.
•
Door is slightly open.
•
Warm air enters the refrigerator whenever the door is
opened. Open the door less often.
•
See
Problem
section, Opening/Closing of Doors/Drawers .
Freezer
temperature is too
warm. Refrigerator
temperature is
satisfactory.
•
Freezer control is set too
warm.
•
Set freezer control to a colder setting. Allow 24 hours for
temperature to stabilize.
Refrigerator
temperature is
too warm. Freezer
temperature is
satisfactory.
•
Refrigerator control is set
too warm.
•
Set refrigerator control to a colder setting. Allow 24 hours
for temperature to stabilize.
Temperature in
the Meat Keeper
is too warm (some
models).
•
Meat Keeper temperature
control is set too warm.
•
Adjust Meat Keeper temperature control to a colder
setting.
Water/Moisture/Frost Inside Refrigerator
Concern Cause Solution
Moisture collects on
inside of refrigerator
walls.
• Weather is hot and humid.
•
Door is slightly open.
• Door is opened too often or
too long.
• Open containers.
• The rate of frost buildup and internal sweating increases.
•
See Problem section, Opening/Closing of Doors/Drawers .
• Open door less often to allow internal temperature to stabilize.
• Keep containers covered.
Water collects on
bottom side of
drawer cover.
• Vegetables contain and give
off moisture.
• Moisture on the bottom side of the cover is not unusual.
• Move humidity control (some models) to lower setting.
Moisture collects in
bottom of drawer.
• Washed vegetables and fruit
drain while in the drawer.
• Fruits and vegetables are kept
past their prime
• Dry items before putting them in the drawer. Water collecting in
bottom of drawer is normal.
• Routinely clean out old fruits and vegetables especially if they
begin to break down.
Moisture collects on
outside of refrigerator
or between doors.
•
Weather is humid.
• Door is slightly open,
causing cold air from inside
refrigerator to meet warm air
from outside.
•
This is normal in humid weather. When humidity is lower, the
moisture should disappear.
• See Problem section,
Opening/Closing of Doors/Drawers
.
Perfect Temp Drawer (some models)
Concern Cause Solution
Display does not
illuminate or shows
“CE”.
• Connector not connected or
loose.
• Remove pan and insure connector is fully engaged. (See
Storage Features
section)
Display shows “LOC”
when buttons are
pressed.
• Drawer in control lock mode. • Press and hold control lock button for three seconds to take
drawer out of control lock mode. (See Storage Features
section)