7
CAUTION
D
o Not loosen or remove these 3 hex
screws.
Installation
To level the cabinet using the front
rollers:
1 Slightly open freezer drawer. Lift the
toe grille and gently pull forward (see
illustration).
2 You can raise or lower each door.
Use a 3/8 inch socket wrench to turn
the adjustment screws (1 per side).
Raise
Lower
Anti-tip
Leg
Door
Door
Toe Grille Must
Fit in Slot on
Anti-tip Bracket
Screw/Washer
Assembly
(3) Retaining Clips
5 Install the toe grille by fitting into
place.
Cabinet Leveling &
Refrigerator Door Align-
ment (if necessary)
Guidelines for final positioning of your
refrigerator:
• All four corners of the cabinet must
rest firmly on the floor.
• The sides should tilt ¼ inch (6 mm)
from front to back (to ensure that
doors close and seal properly).
• Doors should align with each other
and be level.
Most of these conditions can be met by
raising or lowering the adjustable front
rollers.
To raise
: turn adjustment screw
clockwise.
To lower
: turn adjustment screw
counterclockwise.
3 Ensure both doors are bind-free with
their seals touching the cabinet on all
four sides and that cabinet is stable.
4 After unit is leveled, lower anti-tip leg
until it contacts the floor.
DO NOT
Loosen
or
Remove
These 3
Hex
Screws