background image

5

Reservations

Our liability does not apply in the 
event that the damage in question is 
due to any of the following conditions:

The unit has not been installed in 
accordance with the instructions set 
forth in this pamphlet.

The damage is caused by transport at a 
later date, for instance during removal 
or resale.

The damage is caused by any form of 
use contrary to common sense.

Positioning

It is advisable to place the unit near an 
out-of-the-way, or closed corner, with 
space on either side on which to rest 
hot cooking utensils. The unit should 
not be placed at a heavily-trafficked or 
open corner, nor in a passageway.

Unpacking

Check to see whether the unit is 
damaged.

Distribution damages

Any damages due to transportation by 
us or by our representative must be 
reported to the dealer not later than 
one week after receipt of the unit.

Check

If you make a note of the model, 

product and serial numbers on receipt 
you will always have this information 
to hand (See frontpage).

These numbers will be needed for any 
service visits.

The model number plate is placed on 
the bottom of the hob.

Saftey

To enable the consumer to locate any 
leaks in the installation, a smelling 
substance has been added to all gas 
qualities available in the market - town 
gas, natural gas or bottled gas.

When smelling gas or in case of any 
other kind of malfunction of the unit 
switch off the main gas supply or the 
bottled gas and contact service, an 
authorized heating and sanitary 
engineer or your gas supplier.

It is recommended that a maintenance 
check of the gas installation and the 
unit should be performed at least every 
three years. Consult your authorized 
heating and sanitary engineer.

16

If the wok-hob does not work

Check to see whether a fuse has 
blown.

Check to see whether the relay is 
switched off.

If the problem is not with the fuse or 
relay, do not attempt to correct it 
yourself.

Instead, contact our service network - 
all repairs must be performed by our 
service personnel.

Warranty

This unit is warranted against defects 
in materials and workmanship, when 
used as intended, for a period of one 
year from the date of purchase. The 
warranty covers both parts and service, 
as well as necessary transportation 
costs. Keep your proof of purchase.

Reservations

The warranty does not cover damages 
which are not due to defects in 
materials or workmanship. Repair, or 
attempted repair, by any party other 
than our authorized service network 
will invalidate the warranty. The 
warranty does not cover an unjustified 
house-call by our service network.

Service and spare parts

Service and repair of this unit must be 
carried out by our service personnel, or 

by an alternative service organisation, 
approved by the distributor. Only spare 
parts delivered by the distributor may 
be used. Spare parts and service are the 
domain of our service network.

The symbol

on the product or on its packaging indicates that this

product may not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of
this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.

Содержание EHT311X











Отзывы: