background image

7

Operating the appliance

Switching the appliance on and off

3

After switching on, within approx. 10 seconds
a heat setting or a function must be set, other-
wise the appliance automatically switches it-
self off.

Setting the heat setting

  

3

The keep warm setting 

u

 lies between 

and 

. The keep warm setting can be set us-

ing 

 or  . It is used to keep food warm.

Switching the outside ring 
on and off

By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware. 

3

Before an outside ring can be switched on, the
inside ring must be switched on.

 

 

Control panel

Display

Pilot light

Switch on

Touch 

 for 2 seconds 

 / 

 

lights up

Switch off

Touch 

 for 1 second 

 / none 

goes out

Control panel

 

Indicator

To increase

Touch 

u

  to  

To decrease

Touch 

 to  

To switch off

Touch 

 and 

 at the same time

 

Triple cooking zone

Sensor panel

Power indicator

To switch on middle  ring

Touch 

 

for 1-2 seconds

.

One power indicator is lit.

To switch on outside  ring

Touch 

 

for 1-2 seconds

.

Two power indicators are lit.

To switch off outside  ring

Touch 

 

for 1-2 seconds

.

Second power indicator goes out.

To switch off middle  ring

Touch 

 

for 1-2 seconds

.

First power indicator goes out.

Roasting zone

Sensor panel

Power indicator

To switch on outside  ring

Touch 

 

for 1-2 seconds

is lit

To switch off outside  ring

Touch 

 for 1-2 seconds

goes out

Содержание EHS 8671 P





























Отзывы: