Electrolux EHM9780, Руководство по эксплуатации

Страница: 5 / 12

5
Cleaning and maintenance
Before carrying out any operation, disconnect
the appliance from the power supply and
allow it cool
General cleaning
Clean the enamelled parts with lukewarm water and de-
tergent; do not use abrasive products which could dam-
age them.
Clean the flame spreader and caps frequently with boil-
ing water and detergent, making sure to remove all de-
posits.
After use, rinse the stainless-steel parts thoroughly with
water and dry with a soft cloth.
For stubborn stains, use normal non-abrasive detergents
or specific products, readily available on the market.
DO NOT use scouring pads, steel wool or acids.
Cleaning the electric igniter
Automatic ring lighting is ensured by the presence of a
ceramic igniter plug (Fig. 1,
C ). Carefully clean this part
of the top periodically. Also, to prevent difficulty in light-
ing, make sure the flame spreader crown holes are not
clogged (
B ).
The worktop grates are kept in place by two metal
pins located on the back trim of the cooktop. The
grates can be removed from the cooktop for better
cleaning. Lift the grates, keeping them horizontal as
shown in fig. 2.
Do not tilt the grates by levering on the
pins, as this could damage or break the
pins.
If damage is noted, disconnect the
appliance from the power supply in order
to prevent risk of electric shocks, and call
the nearest Authorised Technical
Assistance Centre.
After washing, make sure the grates are correctly
positioned as shown in fig. 2.
The worktop grates can be placed in a dishwasher.
For stubborn stains, use normal non-abrasive
detergents or specific products, readily available
on the market.
DO NOT use scouring pads, steel wool or acids.
Fig. 2
YES
NO
Chromed caps and grates
Chromed caps and grates tend to darken with use. This
is normal and inevitable, but does does affect cooktop
operation in any way.
Enamelled caps and grates are available by re-
quest from your dealer or our Technical Assis-
tance Centres.