Electrolux EHL8840FOG, Руководство пользователя

Страница: 14 / 20

Problem Possible cause Remedy
The heat setting changes
between two levels. The Power management
is activated. Refer to “Power manage-
ment”.
The sensor fields become
hot. The cookware is too large
or you put it too near to
the controls. Put large cookware on
the rear cooking zones if
necessary.
There is no signal when
you touch the panel sen-
sor fields. The signals are deactiva-
ted. Activate the signals (refer
to “Deactivation and acti-
vation of the sounds”).
The backlight is on, but
the contrast of the display
is bad. The hot cookware is on
the display. Remove the object and
let the appliance become
sufficiently cool. If the
contrast is not clear,
speak to the service cen-
tre.
II and text come on. The Automatic Switch Off
operates. Deactivate the appliance
and activate it again.
comes on.
The Child Safety Device
or the Lock function op-
erates. Refer to the chapter “Dai-
ly Use”.
? comes on. No cookware is on the
cooking zone. Put cookware on the
cooking zone.
The cookware is incor-
rect. Use the correct cook-
ware.
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone. Use cookware with cor-
rect dimensions.
The cookware does not
cover the cross / square. Cover the cross / square
fully.
E and a number come
on.
There is an error in the
appliance. Disconnect the appliance
from the electrical supply
for some time. Discon-
nect the fuse from the
electrical system of the
house. Connect it again.
If
E comes on again,
speak to the service cen-
tre.
14 www.electrolux.com