Electrolux EHI3251BE, Инструкция по установке и эксплуатации

Страница: 17 / 33

1
7
OPERATING INSTRUCTIONS
(CONTINUED)
• When you activate the function for the first time you
will get heat setting for the front position, for
the middle position and for the rear position.
You can change the heat settings for each position
separately. The hob will remember your heat settings
next time you activate the function.
Activating the function
To activate the function place the cookware in the correct
position on the cooking area. Touch . The indicator above
the symbol comes on. If you do not place the cookware
on the cooking area comes on and after 2 minutes the
flexible induction cooking area is set to .
Deactivating the function
To deactivate the function touch or set the heat setting to
. The indicator above the symbol goes off.
SenseFry function
This function lets you set a heat setting level to fry
your food. The hob keeps the selected temperature
automatically while frying. Once the heat setting level is set,
no manual temperature adjustment is necessary.
To activate the function:
1. Put an empty pan on the left front cooking zone.
Do not use a lid while using the function.
2. Press . The indicator above the symbol comes on.
The heat setting is set to .
3. Set the best heat setting for the food you want to fry.
Refer to the table in Hints and tips chapter.
The indicators above the symbol start to flash slowly.
The zone is heating up.
4. Wait until the pan reaches the temperature you set.
A signal sounds. All indicators above the symbol
are on.
5. Put the food and some fat on the pan.
To deactivate the function:
Touch 0 of the left front cooking zone or touch .
IMPORTANT
You can set the function for the left front
cooking zone of the hob. Only for EHI635BE.
You can set the function for the left rear cooking
zone of the hob only for
EHI977BE
CAUTION!
Use laminated pans only with low heat setting
level to prevent overheating and damage of
the cookware.
Only for applies to EHI3251BE & EHI977BE