Electrolux EHG30835X, Инструкция

Страница: 6 / 13

61
The following instructions about installation and
maintenance must be carried out by qualified
personnel in compliance with the regulation in
force.
The appliance must be electrically disconnected
before all interventions. If any electric supply to
the appliance is required to carry out the work,
ensure all the necessary precautions are followed.
The side walls of the unit in which the hob is
going to be installed, must not exceed the height
of the working top.
Avoid installing the appliance in the proximity of
inflammable materials (e.g. curtains, tea towels
etc.).
Instruction for the Installer
Gas Burners Rating
Triple Crown Burner 4,0 kW
Appliance Class 3
Category II2H3+
Electric supply 230 V ~ 50 Hz
Setting
Natural Gas G20 -20 mbar
Gas connection G 1/2"
Technical Data
Hob recess dimensions
Length 490 mm
Width 270 mm
THE MANUFACTURER WILL NOT ACCEPT
LIABILITY, SHOULD ANY OF THE OTHER SAFETY
INSTRUCTIONS INCORPORATED IN THIS BOOK
OR THE REGULATION IN FORCE BE IGNORED.
Before leaving the factory this appliance was tested and
verified by specialized personnel, in order to ensure best
performance.
Any repair work which needs to be carried out should be
done with the utmost care and attention.
For this reason we recommend that for any problem you
contact the dealer who sold it to you, or our nearest
authorized Service Centre, specifying the nature of the
problem, the appliance model (
Mod. ), the product
number ( Prod. No. ) and the serial number ( Ser. No. )
marked on the identification plate.
This information is given on the dataplate which is
supplied in the accessories plastic bag.
Genuine spare parts, certified by manufacturer and car-
rying this mark
are only available at our Service Centres and Authorized
Spare Parts Stores.
Service and Spare Parts