4
4. Technical Data
Gas Burners Rating
Rapid Burner (big)
3 kW (G20) - 2,8 kW (G30/31)
Auxiliary Burner (small)
1 kW
Category
II 2H3+
Setting
Natural Gas G 20 - 20 mbar
Gas connection
G 1/2"
Electric Supply
230 V 50 Hz
HOB RECESS DIMENSIONS
Length
270 mm
Width
490 mm
2. Cleaning and Maintenance
• Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
manteinance work.
Wash the enamelled components with warm soapy
water. Never use abrasive cleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
Carefully wash the stainless steel components with
water, then wipe them dry with a soft cloth.
The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.
In models provided with electric ignition, this feature
is obtained through a ceramic "candle" and a metal
electrode (Fig. 1 - lett. C). Keep these components well
clean, to avoid difficult lighting, and check that the
burner crown holes (Fig. 1 - lett. B) are not obstructed.
PERIODIC MAINTENANCE
Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.
z
z
z
z
z
The periodic lubrication of the taps must be
carried out by qualified personnel, which you
must refer to also in case of malfunctioning.
Fig. 2
FO 2110
This machine, before leaving the factory, has been
tested and studied by many experts and specialists, in
order to give you the best results.
Any repair work which needs to be carried out should be
done with the utmost care and attention.
For this reason we recommend that for any problem you
contact the dealer who sold it to you, or our nearest
authorized Service Centre, specifying the nature of the
problem, the appliance model (
Mod.
), the product
number (
Prod. No.
) and the serial number (
Ser. No.
)
marked on the identification plate.
3. Service and original spare parts
Original spareparts, certified by the product
manufacturer and carrying this symbol are only available
at our Service Centre and authorized spareparts shops.
