Electrolux EHED 63 CS, Руководство пользователя

Страница: 12 / 38

the surface. Wipe the appliance with a
damp cloth and a little washing up liquid.
Finally,
rub the appliance dry using a
clean cloth .
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for glass
ceramic or stainless steel.
Warning! Do not use a steam cleaner to
clean this appliance.
What to do if ...
Problem Possible cause Remedy
The appliance cannot be switch-
ed on or is not operating More than 10 seconds have
passed since the appliance was
switched on Switch the appliance on again.
The lock is switched on
Switch off the lock (See the sec-
tion “Locking/unlocking the con-
trol panel”)
The child safety device is switch-
ed on Deactivate child safety device
(See the section “Child safety
device”)
Several sensor fields were
touched at the same time Only touch one sensor field
Automatic switch off has been
triggered Remove any objects (pan,
cloths, etc.) that are lying on the
control panel. Switch the appli-
ance on again
The residual heat indicator is not
displaying anything The cooking zone was only on
for a short time and is therefore
not hot If the cooking zone is supposed
to be hot, call the Customer
Service Department.
The automatic warm up function
is not switching itself on There is still residual heat on the
cooking zone Let the cooking zone cool down
The highest heat setting is set The highest heat setting has the
same power as the automatic
warm up function
Repeated acoustic signal (6x),
appliance switches off One or more sensor fields have
been covered for longer than 10
seconds Uncover sensor field
Acoustic signal sounds when
appliance is switched off The control panel is wholly or
partly covered by objects. Remove objects.
Acoustic signal sounds and ap-
pliance switches itself on and
then off again; after 5 seconds
another acoustic signal sounds The On/Off sensor field has
been covered up, e.g. by a cloth Do not place any objects on the
control panel
Display is switching between
two heat settings Power management is reducing
the power of this cooking zone See the section “Switching the
power function on and off”
lights up
Unsuitable cookware Use suitable cookware
No cookware on the cooking
zone Place cookware on the cooking
zone
The diameter of the bottom of
the cookware is too small for the
cooking zone Move onto a smaller cooking
zone
12 electrolux what to do if...