11
USING YOUR aPPLIaNCE
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all the
way then lift bin out from the front of the bin. When refitting
insert the rear of the bin first then lower into position.
Spillsafe™ glass shelves
Spillsafe™ glass shelves keep spills on the shelf. a shelf
retaining system minimises accidental movement of
shelves and they can be adjusted to various heights.
Spillsafe™ glass shelves are not to be used as slide out
shelves.
To remove the shelves, gently pull them forward until the
shelf comes clear of the shelf guides. To return the shelf,
make sure there is nothing behind that may obstruct
movement. Gently push the shelf into the cabinet and
back into position.
Freezer drawers
The drawer is mounted on telescopic extension slides,
to enable full access to the contents. a clear plastic front
provides easy visibility.
To remove the drawer for cleaning,
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting
the front to unhook it from the slides. Once you have
removed the drawer, ensure the slides are pushed
back so they are fully closed.
CaUTIon!
Never close the door while the telescopic slides
are extended. This may damage the slide and/or
refrigerator or cause the slide to become disengaged
from the refrigerator.
To replace the drawer
1. With the telescopic slides pushed in all the way.
2. Slide the drawer into place over the slides and push
the bin in until it stops. The bin will not be closed all
the way.
3. Open the bin to access the finger tabs at the ends of
the telescopic slides, on each side of the bin. Using
your thumb and forefinger, lift the bin over the end
of the slide and clip in place. If the drawer is not fully
engaged on the slide, it’s possible the drawer won’t
stay on the slide if fully extended.
The end of slide must
be clipped into place
4. Fully close the bin.
When replacing the drawers after cleaning, we
recommend fitting the freezer bottom bin first.
