Electrolux EHD8740FOK, Руководство пользователя

Страница: 8 / 24

4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds some time and
the appliance deactivates. Remove the
object or clean the control panel.
• The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before
you use the appliance again, wait for
the cooking zone to cool down.
• You use incorrect cookware. The sym-
bol comes on and the cooking zone
deactivates automatically after 2 mi-
nutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the appliance
deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
•
, - — 6 hours
•
- — 5 hours
•
- — 4 hours
•
- — 1.5 hours
4.3 The heat setting
Touch the control bar at the heat setting.
Change clockwise or counterclockwise, if
it is necessary. Do not release before you
have a correct heat setting. The display
shows the heat setting.
4.4 Connect Function
Use the Connect Function with
the Infinite Plancha accessory
1)
.
The Connect Function connects two right
side cooking zones under the accessory
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the Connect Function, touch
. To set or change the heat setting,
touch one of the control sensors.
To deactivate the Connect Function,
touch
. The cooking zones operate in-
dependently.
4.5 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see
the diagram), and then decreases to the
necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1.
Touch ( comes on in the dis-
play).
2.
Immediately touch the necessary heat
setting. After 5 seconds
comes on
in the display.
To stop the function change the heat set-
ting.
1)
The Infinite Plancha accessory is not supplied with the appliance. For more information,
please contact your local supplier.
8
www.electrolux.com