Switching the Power function on and off
The Power function makes more power avail-
able to the induction cooking zones. The
Power function is activated for 10 minutes at
most. After that the induction cooking zone
automatically switches back to the highest
heat setting (9). To switch on, touch
, the
indicator above comes on. To switch off,
touch a heat setting (1-9).
Power management
The power management divides the power
between two cooking zones in a pair (see the
figure). The power function increases the
power to the maximum level for one cooking
zone in the pair and automatically decreases
in the second cooking zone to a lower power
level. The display for the reduced zone alter-
nates.
Using the Timer
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for one cooking
session.
Set the Count Down Timer after the se-
lection of the cooking zone.
You can set the heat setting before or after
you set the timer.
•
Selection of the cooking zone:
touch
again and again until the indicator of a
necessary cooking zone comes on.
•
Starting the Count Down Timer:
touch
of the timer to set the time (
00
-
99
minutes). When the indicator of the cook-
ing zone flashes slower, the time counts
down.
•
Checking the remaining time:
select
the cooking zone with
. The indicator of
the cooking zone flashes faster. Display
shows the remaining time.
•
Changing the Count Down Timer:
se-
lect the cooking zone with
touch
or
.
•
Stopping the timer:
select the cooking
zone with
. Touch . The remaining
time counts backwards to
00
. The indi-
cator of the cooking zone goes out. To
switch off You can also touch
and at
the same time.
When the time elapses, the sound oper-
ates and
00
flashes. The cooking zone
switches off.
•
Stopping the sound:
touch
CountUp Timer (Count up timer)
Use the CountUp Timer to monitor how long
the cooking zone operates.
•
Selection of the cooking zone (if more
than 1 cooking zone operate):
touch
again and again until the indicator of a
necessary cooking zone comes on.
•
Starting the CountUp Timer:
touch of
the timer
comes on. When the indicator
of the cooking zone flashes slower, the
time counts up, display switches between
and time elapsed (minutes)
•
Checking the elapsed time:
select the
cooking zone with
. The indicator of the
cooking zone flashes faster. Display
shows the elapsed time.
•
Stopping the CountUp Timer:
select
the cooking zone with
and touch
or
to switch off the timer. The indicator of
the cooking zone goes out.
Minute Minder
You can use the timer as a
Minute Minder
while cooking zones do not operate. Touch
. Touch
or of the timer to select the
time. When the time elapses, the sound op-
erates and
00
flashes.
Starting the STOP+GO
The
function sets all cooking zones that
operate to a keep warm setting.
•
Touch
to start
this function. The sym-
bol
comes on.
electrolux
7
