background image

2

About Installation, Cleaning and Manteinance

It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and regulations.

Disconnect the appliance from the electrical supply, before
carrying out any cleaning or manteinance work.

Ensure a good ventilation around the appliance. A poor air
supply could cause lack of oxygen.

Ensure that the gas supply complies with the gas type
stated on the identification label, placed near the gas
supply pipe.

Using a gas cooking appliance will produce heat and
moisture in the room which it has been installed in.
Ensure a continuous air supply, keeping the air vents in
good conditions or installing a cooker hood with
discharge tube.

In case of intensive or long time use of the appliance,
make the ventilation more efficient, by opening a
window or increasing the electric exhaust fan power.

Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is in
perfect conditions. Otherwise, contact your dealer before
proceeding with the installation.

The manufacturer disclaims any responsability should
all the safety measures not be carried out.

Under no circumstances should you attempt to repair the
appliance yourself. Repairs carried out by unexperienced
persons may cause injury or serious  malfunctioning.
Refer to your local Service Centre. Always insist on
genuine spare parts.

Child Safety

This appliance has been designed to be operated by
adults and children under supervision. Young children

MUST

 

NOT

 be allowed to tamper with the controls or play

near or with the oven.

Accessible parts of this appliance may become hot
when it is in use. Children should be 

KEPT

 

AWAY

 until it has

cooled.

During Operation

It is most important that this instruction book should be
retained with the appliance for future reference. Should
the appliance be sold or transferred, always ensure that
the book is left with the appliance in order that the new
owner can get to know the functions of the appliance and
the relevant warnings.

This appliance  has been designed for non professional
purpose in private houses only. It is meant to cook edible
foodstuff only and 

MUST

 

NOT

 be used for any other purposes.

It is 

dangerous 

to alter the specification in any way.

For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.

Under no circumstances should you attempt to repair the
appliance yourself. Repairs carried out by unexperienced
persons may cause injury or serious  malfunctioning.

English

These warnings are provided in the interest of safety. You 

MUST

 read them carefully before

installing or using the appliance.

 Important Safety Information

Refer to your local  Service Centre. Always insist on
genuine  spare parts.

Ensure that all control knobs are in the OFF position when
not in use.

Should you connect any electrical tool to a plug near this
cooking appliance, ensure that electric cables are not in
contact with it and keep them far enough from the heated
parts of this appliance.

If the appliance is out of order, disconnect it from the
electric supply.

Ceramic hob

The residual heat indicator comes on when the cooking
zone is switched on. Children should be kept away until
it switches off.

Never use the ceramic hob as a working space. Do not
store things on the ceramic hob.

Never use plastic or aluminium foil dishes on the
ceramic hob, as they could melt on the hob, thus
damaging it. Anyway,If anything of this nature accidentally
comes into contact with the ceramic surface it must be
scraped off immediately  while stlll hot and wiped away
to avoid damage to the surface.   In the same way, remove
sugar or food residues with hich sugar content, which
may have split from saucepans by using a scraper for
ceramic hobs.

Unstable or misshapen pans should not be used on
the ceramic hob as unstable pans can cause an accident
by tipping or spillage.

The ceramic hob is shockproof, but not unbreakable!
Hard or pointed objects falling from a height can damage
the hob. If scratches or cracks are noticed, disconnect
the appliance from the electrical supply and call you
nearest Service Force Centre.

Never use scratching sponges, abrasive products or
chemically powerful detergents. Use only cleaning
agents specific for ceramic hobs.

 

Environmental Information

After installation, please dispose of the packaging with
due regard to safety and the environment.

When disposing of an old appliance, make it unusable, by
cutting off the cable.

Il simbolo 

 sul prodotto o sulla confezione indica

che il prodotto non deve essere considerato come un
normale rifiuto domestico, ma deve essere portato nel
punto di raccolta appropriato per il riciclaggio di
apparecchiature elettriche ed elettroniche. Provveden-
do a smaltire questo prodotto in modo appropriato, si
contribuisce a evitare potenziali conseguenze negative
per l’ambiente e per la salute, che potrebbero derivare
da uno smaltimento inadeguato del prodotto. Per infor-
mazioni più dettagliate sul riciclaggio di questo prodot-
to, contattare l’ufficio comunale, il servizio locale di
smaltimento rifiuti o il negozio in cui è stato acquistato
il prodotto.

Содержание EGM 626












Отзывы: