Electrolux EFP 636, Руководство пользователя

Страница: 4 / 11

45
0 I 0
1 Motor speed switch
2 Light switch
3 Extractable drawer
4 Suction grids with grease filter
5 Hob light
Standard accessories included:
●
Template for mounting under cupboard
●
Screws
●
4 Spacers for thinner side panels
●
Duct with no return valve
●
Baffle
Function
The hood may be used as follows:
- For air exhausting
- For air recycling
Exhausting
The appliance has the exhaust outlet B (Fig. 2) on
top of motor housing.
Connect the hood to the smoke exhaust hose
by using the connecting ring with no return
valve B (Fig. 2)
Attention! In the horizontal runs the duct must be
slightly slanted (about 10
°
) and directed upwards
to vent the air easily from the room to the outside.
The hood cannot be connected to flues
of other appliances that run on energy
sources other than electricity.
Please, keep to the provisions of official directives
regarding the question of fumes discharge.
Recycling
The air is filtered through a carbon filter and
recirculated into the room.
This version is used when there is no exhaust duct
for venting outdoors or when it is impossible to
install one.
The filtered air is discharged by means of a Ø120
mm pipe which goes through the cupboard and
whose outlet is above the cupboard.
The baffle E which can be fastened to outlet hole
using the screw provided (Fig. 3).
Description of the appliance
3
5
Fig. 1
Ø 120mm
E
E
Fig. 3
Ø 120mm
B
Fig. 2
2
1
4