45
Changing the light bulb
Disconnect the cooker hood from the
mains supply.
Lower light(s) Fig. 5
20W max halogen lamp (G4)
Raise the overhead light and remove it using a
screwdriver
Fig. 5.
Extract the damaged lamp and replace it with
another of an equivalent type.
Lateral light(s) Fig. 6
Attention!
To guarantee the same quality of
illumination, we advise using the same type of
lamp: Philips neon lamp of 8Watt max (G5) Ref.
Code 8711500644275.
Take care that the transparent side of the lamp is
facing outwards to guarantee a correct diffusion of
the illumination.
Lamps of different producers can be used as long
as they have the same technical characteristics.
Release the two tabs at the sides (upper and
lower spring attachment/release) of the
overhead light. If necessary lever with a small
screwdriver taking care not to damage the
glass.
Unscrew the screw that fixes the overhead
light.
Extract the lamp-holder from below and release
it from the attachment point above.
Remove the lamp and replace it with a new one
of equivalent type.
Replace the
Starter
if necessary (bayonet
fixture).
Upper light(s) Fig. 6
36W max PL lamp (2G11)
Remove the
overhead light
unscrewing the
two lateral screws.
Pull the lamp to release it from its seat.
Extract the damaged lamp and replace it with
another of an equivalent type.
Replace the
Starter
if necessary (bayonet
fixture).
Remount the overhead light.
Before contacting the assistance service
because the lamp does not switch on, check
that it is inserted correctly.
Fig. 5
Fig. 6
