background image

4

Introduction

The hood is supplied as an extractor unit and
can also be used with a filtering function by
fitting one charcoal filter (special accessory).

You will need original ELECTROLUX
charcoal filter for this function (see Special
Accessories).

Extractor version

The air is discharged to the outside through a
pipe, which must be fitted to connection flange
DFig. 1.

In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Should there already be a pipe of diameter 125
mm that ducts to the outside through the walls
or roof, it is possible to use the 150/125 mm
reduction flange provided. In this case the hood
will be slightly more noisy.

Filter Version

The air is filtered through an charcoal filter
and returned to the kitchen through the top
grill of the outlet pipe.

You will need an original ELECTROLUX
KF20 charcoal filter for the filtering
function. (See Special Accessories).

Fix the deflector using 4 screws Ø3,5x9.5 mm.
Fig. 2.

Fig. 1

D

Fig. 2

Light switch

Extractor fan switch

Push-button 1

Push-button 2

0

1

2

3

Push-button 3

Best results are obtained by using a low speed
for normal conditions and high speed when
odours are more concentrated. Turn the hood on
a few minutes before you start cooking then you
will get an underpressure in the kitchen. It
should be left on after cooking for about 15
minutes or until all odours have disappeared.
The control switches are located on the unit’s
front panel:

Light switch: this switch is used to turn the
light fitted in the hood on and off.

Extractor fan switch: used to turn the fan off.

Push-button 1: used to set the fan to speed 1.

Push-button 2: used to set the fan to speed 2.

Push-button 3: used to set the fan to speed 3.

Correct ventilation

If the cooker hood is to work correctly there must
be an under pressure in the kitchen. It is important
to keep the kitchen windows closed and have a
window in an adjacent room open

Hood Operation

Содержание EFC 9461













Отзывы: