background image

41

Technical Specifications

Models:

EFC 9460

EFC 9415

Dimensions (in cm):

Height

74,5-116

66-116

Width

89,8

89,8

Depth

50

50

Maximum absorbed power:

200 W

215 W

Motor absorption:

1 x 170 W

1 x 175 W

Lighting:

2 x 20 W

2 x 20 W

Length of the cable:

150 cm

150 cm

Electrical connection:

220-240 V

230 W

We reserve the right to generate constructive and chromatic modifications as required by technological growth.

Technical assistance service (not for UK)

You are welcome to telephone our technical assistance service (see list of technical assistance centres)
whenever you need information or in the unlikely event of a fault.
For service in Australia call 1300 650 020.
When calling, please be ready to specify:

1. The model code number
2. The serial number (E-Nr.)
3. The manufacturing number (F-Nr.)

This information is shown on the registration plate inside the unit behind the grease filter.

We reserve the right to change specifications and colours as a result of our policy of continuing technological
development.

Service and spare parts for UK

In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local
ELECTROLUX Service Force Centre by telephoning: 

08705 929 929

Your call will be automatically routed to the Service Centre covering your post code area. For the address of
your local Service Force Centre and further information about Service Force, please visit the website at
www.serviceforce.co.uk
Please ensure that you have read the section „What to do if....“ as the engineer will make a charge if the fault is
not a mechanical or electrical breakdown even the appliance is under warranty. 

Please note that proof of

purchase is required for in-guarantee service calls.

Help us to help you

Please determine your type of enquiry before writing or telephoning.
When you contact us we need to know:

Your name

Clear and concise details of the fault

Address and post code

Name and model of the appliance*

Telephone number

E number*

* This information can be found on the rating plate, which can be seen when the grease filters are removed.

Содержание EFC 9415
















Отзывы: