38
Warning
Failure to observe the instructions on cleaning
the unit and changing the filters will cause a fire
hazard. You are therefore strongly
recommended to follow these instructions.
The manufacturer declines all responsibility for
any damage to the motor or any fire damage
linked to inappropriate maintenance or failure to
observe the above safety recommendations.
Cleaning the hood
Clean the outside of the hood using a damp
cloth and a solution of water and mild washing
up liquid.
Never use corrosive, abrasive or flammable
cleaning products or products containing bleach.
.
Never insert pointed objects in the motors
protective grid.
Only ever clean the switch panel and filter grill
using a damp cloth and mild washing up liquid.
It is extremely important to clean the unit and
change the filters at the recommended intervals.
Failure to do so will cause grease deposits to
build up that could constitute a fire hazard.
Metal grease filter
The purpose of the grease filters is to absorb
grease particles which form during cooking and
it
must
always be used, either in the external
extraction or internal re-circulation function.
Attention: the metal grease filters must be
removed and washed, either by hand or in the
dishwasher, every four weeks.
Removing the metal grease filter
First pull the
latches
backwards, then extract
the grille outwards.
Fig. 3
.
Hand washing
Soak grease filters for about one hour in hot
water with a grease-loosening cleaner, then
rinse off thoroughly with hot water. Repeat the
process if necessary. Refit the grease filters
when they are dry.
Dishwasher
Place grease filters in the dishwasher. Select
most powerful washing programme and highest
temperature, at least 65°C. Repeat the process.
Refit the grease filters when they are dry.
When washing the metal grease filter in the
dishwasher a slight discolouration of the filter
can occur, this does not have any impact on its
performance.
Clean the inner housing using a hand hot
solution only(never use caustic detergents,
abrasive powders or brushes).
The hood must always be disconnected from the electricity supply before beginning any
maintenance work.
Maintenance and Care
Fig. 3
