49
Installation
Mounting accessories included
6 wall plugs Ø 8 mm (brick fixing
only)
6 wood-screws 5 x 45 mm
2 metal screws 2,9 x 13
4 metal screws 2,9 x 6,5
5 metal screws 3,5 x 9,5
2 hooks
1 chimney support
2 clamps
1 deflector
1 charcoal filter frame
1 allen spanner
Wall unit mounting -
Fig. 7
Position the template on the wall
(1)
and mark the position, and
drill
(2)
the holes (2 x Ø 8 mm).
Mount the two wall plugs with
the hooks
(3)
.
Hang the hood on the hooks and
level it with the adjustment
screws
(4)
.
Remove the grease filters
(5)
and mark for the two screws
(6)
. Remove the hood and drill
the holes (2 x Ø 8 mm).
Insert the rawl plugs
(7)
and
hang the hood on the wall again.
Adjust it with the screws
(8)
and
secure it with the screws
(9)
.
Mount the chimney support
(11)
with the wall plugs
(10)
and the
screws
(12)
. Be careful that it is
centered over the hood and
horizontally aligned.
Extractor version
: Connect a
tube between the hood air outlet
and the wall or roof exhaust
channel. Fix it with the tube
clamps supplied.
Filter version
: Mount the
deflector
K
with the two screws supplied (2,9x13 mm)
(13)
.
Make the electrical connection
(14)
(see previous page)
Place the chimney
(15)
and fix it to the top chimney support with the two screws
(16)
supplied
(2,9x6,5 mm).
Lower the bottom part of the chimney
(17)
and fasten it to the top of the hood with two screws, supplied
(18)
(2,9x6,5 mm).
K
13
*
4
3
2
2
8
8
1
6
6
6
7
7
9
9
6
10
10
11
12
12
14
15
16
16
17
18
18
5
4
4
Fig. 7
