SOI/TD - PR
11
599 36 01-86
4.7 Buzzer (only certain models)
The buzzer sounds to indicate the
end of cycle
and in the event of an
alarm condition
.
The buzzer sounds three times at the end of the cycle, but switches off immediately if the door is opened.
If the user prefers to switch off the buzzer, it is necessary to press a combination of buttons.
4.7.1
Activating/disactivating the buzzer
1. Cancel any cycles that have been selected.
2. Press
S0
to switch the appliance on (LD0, salt and rinse-aid LEDs).
3. Press buttons
S2
and
S3
at the same time until LEDs LD1, LD2 and LD3 begin to flash.
4. Press button
S3
: LEDs LD1 and LD2 switch off, while LD3 continues to flash.
The condition of the buzzer is indicated by the display:
1b
buzzer on, :
0b
buzzer off
5. Press button
S3
again to disactivate/activate the buzzer
6. To store this operation in memory: press button
S0
and switch the appliance off or wait 60 seconds, the
appliance is in selection mode.
