Electrolux EDH903R9WB, Руководство пользователя, Страница: 24 / 56

Problem Possible solution
The App frequently cannot connect to the
dryer.
Try to move the home router as near the
dryer as possible or consider purchasing
a wireless range extender.
Turn the microwave off. Avoid using the
microwave and the Remote Control of the
dryer at the same time. The microwaves
disrupt the Wi-Fi signal.
The display shows .
If you want to set a new programme, de‐
activate and activate the appliance.
Make sure that the options are suitable
for the programme.
1) After maximum 5 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor ( See chapter " Settings -
Adjustment of the remaining laundry
moisture degree
" for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 18°C
to 25°C )
14. TECHNICAL DATA
Height x Width x Depth 850 x 596 x 638 mm (maximum 662 mm)
Max. depth with the appliance door open 1107 mm
Max. width with the appliance door open
958 mm
Adjustable height 850 mm (+ 15 mm - feet adjustment)
Drum volume 118 l
Maximum load 9,0 kg
Voltage 220-240 V
Frequency 50 Hz
Total power 700 W
Type of use Household
Permitted ambient temperature + 5°C to + 35°C
www.electrolux.com 24