Electrolux EDC67550W, Руководство пользователя

Страница: 13 / 32

Have you pressed the START/
PAUSE (START/PAUSE) button? Press the START/PAUSE (START/
PAUSE) button again.
Drying results unsatisfac-
tory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Programme
overview” chapter).
Lint filters clogged. Clean lint filters.
Fluff filter clogged. Clean fluff filter.
Heat exchanger clogged with lint. Clean heat exchanger.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots in base area cov-
ered up. Uncover ventilation slots in base
area.
Residue on inside surface of drum
or drum ribs. Clean inside surface of drum and
drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine. Re-programme standard setting for
degree of drying (see ‘Program-
ming options’ chapter).
When a button is pressed
- no reaction of the ma-
chine. Drying protection. After the start of
the programme, the option can no
longer be set.
Turn the programme knob to O
off . Set the programme again.
Displayed programme
time changes erratically or
stays unchanged for a
long time. Programme time is corrected auto-
matically depending on type and
volume of laundry and level of
dampness.
Automatic process; this is not a
machine fault.
Programme inactive,
CONTAINER display illu-
minated.
Condensate tank is full.
Empty condensate tank, then start
programme with START/PAUSE
(START/PAUSE) button.
Drying cycle ends shortly
after programme starts.
ANTICREASE (ANTI-
CREASE) light is on.
Not enough washing loaded or
washing loaded is too dry for selec-
ted programme.
Select time programme or higher
drying level (e.g.
EXTRA (EX-
TRA) instead of CUPBOARD
(CUPBOARD).
Drying cycle lasts an un-
usually long time. Note:
After up to 5 hours the
drying cycle ends auto-
matically (see ‘End of dry-
ing cycle’).
Lint filter clogged. Clean lint filter.
Fluff filter clogged. Clean fluff filter.
Load volume too big. Reduce load volume.
Laundry insufficiently spun. Laundry must be adequately spun.
Particularly high room temperature.
Temporary switching off of the
compressor to avoid overload. Automatic process, there is no fault
with the appliance. If possible, low-
er the room temperature.
Discoloration Colour fastness of textiles.
Check colour fastness of textiles.
Only treat textiles together if they
are a similar colour.
electrolux 13