18
Changing bulb for inside
light
Only use a special bulb which is designed specially
for dryers. The special bulb is available from the af-
ter-sales service, ET-Nr. 112 552 000-5.
1
Warning!
Do not use standard bulbs! These
develop too much heat and may damage the
machine!
1
Warning!
Before replacing the bulb, discon-
nect the mains plug; with a permanent con-
nection: fully unscrew or deactivate the fuse.
1.
Unscrew covering bonnet from above bulb (this
can be found directly behind the loading aperture,
at the top; refer to “Description of machine” sec-
tion.)
2.
Replace defective bulb.
3.
Screw covering bonnet back down.
1
Warning!
For reasons associated with safety,
the covering bonnet must be screwed down
tightly. If this is not done, the dryer must not
be operated.
When pressing a button, the
corresponding button flashes
several times.
Washing protection. After the start of
the programme, the option can no
longer be set.
Turn the programme knob to OFF
(AUS). Set the programme again.
Drum light does not work.
Programme selector in OFF (AUS)
position.
Turn programme selector to LIGHT (BE-
LEUCHTUNG) or to any programme.
Defective lamp.
Replace lamp (see next section).
Programme inactive, EMPTY
WATER (BEHÄLTER) display
illuminated.
Condensate tank is full.
Empty condensate tank, then start pro-
gramme with START/PAUSE button.
Drying cycle ends shortly after
programme starts. END
(ENDE) display illuminated.
Not enough washing loaded or
washing loaded is too dry for select-
ed programme.
Select time programme or higher drying
level (e.g. INTENSIVE DRY [STARK
TROCKEN] instead of STORAGE DRY
[SCHRANK TROCKEN]).
Drying cycle lasts an unusual-
ly long time.
Note:
After up to 5 hours the drying
cycle finishes automatically
(see ”Drying cycle complete”).
Lint filter clogged.
Clean lint filter.
Heat exchanger clogged with lint.
Clean heat exchanger.
SPECIAL CARE (SCHON) button
pressed and load volume too big.
SPECIAL CARE (SCHON) is only suita-
ble for use with loads of up to 3kg!
Load volume too big.
Reduce load volume.
Laundry insufficiently pre-drained.
Laundry must be adequately pre-
drained.
Problem
Possible cause
Remedy
Содержание EDC 5369
Страница 1: ...C o n d e n s a t i o n d r y e r User Information EDC 5369 822 944 734 01 240306 02 g ...
Страница 26: ...26 ...