Electrolux EDC 5365, Руководство по эксплуатации

Страница: 22 / 24

22
Installation and electrical connection
Please refer to the type plate for specifications about
the power supply. The nominal voltage stated on the
type plate and type of current must be identical with
the nominal voltage and type of current at the point of
installation. Also refer to the type plate for the fuse
required.
Information for the electrician
When connecting the appliance without a plug, care
must be taken that this is done correctly. Please fol-
low the relevant information in the section on install-
ing and connecting the appliance.
For appliances with variable voltage settings, the
switch-over diagram can be found on the cover of the
connection box at the back of the appliance. If the appliance is connected by a plug to 230 V AC,
only a Type 12 L+N+PE 250 V, 10 A Swiss plug may
be used in accordance with Standard Specifications
Sheet SEV 6534-2,1991. The plug must be installed
in phase in accordance with the rating plate (it is
essential that phase L of the socket is contacted with
the brown wire of the mains cable).
Improper connection can lead to the risk of a fire in
the dryer.
Service
In the chapter "Something not working" some distur-
bances have been summarised, which you can solve
yourself. If you do not find any helpful information
there, please contact your local customer service
centre. It is nearby and if necessary can reach you
quickly.
(Addresses and phone numbers can be found in the
Warranty Conditions/Service Departments)
Be well prepared before you phone. This facilitates
the diagnosis and the decision as to whether a cus-
tomer service visit is necessary. With our checklist
you can gather important information before making
your call:
Make a note of the PNC number and the S number.
They are both on the rating plate behind your tumble
dryer’s door.
PNC .........................................................................
S-No .........................................................................
If possible establish:
• How is the disturbance evident?
• Under what circumstances does the disturbance
occur?
When do you incur costs even during the
warranty period?
– if you could have solved the disturbance your-
self with the help of the Troubleshooting table
(see section "Something not working"),
– if the customer service engineer has to make
several journeys because he did not receive all
the necessary important information before his
visit and now e.g. has to fetch spares. You can
avoid these extra trips by preparing your tele-
phone call properly in the way described
above.