54
USE
Control Panel
EDC 505 E
1
12
11
10
9
8
7
6
5
4
3
2
1 Water container
It must be emptied after each drying cycle.
2 Programme chart
This will help you to select the correct time or
programme for drying.
3 Door opening button/stop
button
To open door, press this button. Should the door
be opened while the appliance is working, the
tumble dryer will stop functioning.
4 Low temperature button
Press this button to reduce drying temperature.
This option should be used only when drying
synthetics with a time controlled programme.
5 Buzzer OFF button
During the anti-crease phase, the buzzer will
sound. Press this button to switch the sound off.
Important: If the water container is full, the
buzzer will sound even if this button has been
depressed.
6 Start button
After selecting the programme or drying time
depress this button to start the appliance.
Should the door be opened while appliance is
drying, the START button has to be
depressed again after closing the door to
allow the programme to continue.
This button must be depressed also after a
power failure and after having re-inserted the
water container, if it has been emptied during the
drying programme.
7 “Drying” light
This light indicates that the machine is
performing the drying programme.
8 “Cooling” light
This light will illuminate when the cooling phase
is in operation.
A cooling phase of 9 minutes is performed at the
end of the drying programme before the anti-
crease phase.
9 “Water container full” light
This light flashes when the container is full.
