Electrolux EBVSL6, Руководство пользователя, Страница: 24 / 36

24 electrolux
1 Important! Do not use oven sprays or
abrasive cleaners. Do not use soap or
other cleaning agents. Doing so can
damage the catalytic surface.
3
Over time the catalytic coating can dis-
colour slightly. This does not affect its
catalytic properties.
Accessories
Wash all slide-in units (shelf unit, baking tray,
shelf support rails etc.) after each use and
dry well. Soak briefly to make them easier to
clean.
Aluminium base plate
1
Never use cleaning materials, cleaning
agents or steel wool that scratch or
scour.
Do not clean in the dishwasher.
After each use, wash the aluminium base
plate using a soft brush in hot water with
washing-up liquid.
With stubborn dirt, soak for a while in hot
water with soap suds.
1
When cleaning, use a flat surface to pre-
vent the aluminium bas plate from de-
forming.
Shelf Support Rails
The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall (1) and then unhitch at the back (2).
Fitting the shelf support rails
3
Important! The rounded ends of the
guide rails must be pointing forwards!
To re-insert, first hook the rail into place at
the back (1) and then insert the front and
press into place (2).
Fat trap
The fat trap is almost maintenance free.
However, certain residues may occur due to
the frequent preparation of very fatty foods.
In this case proceed as follows for possible
cleaning actions:
1 Important : On the heating elements of
the oven roof, there is a risk of burns !
Ensure that the oven has cooled down