Problem
Possible cause
Remedy
The display shows "C2".
You want to start the De-
frost function, but you did
not remove the core tem-
perature sensor plug from
the socket.
Remove the core tempera-
ture sensor plug from the
socket.
The display shows an error
code that is not in this ta-
ble.
There is an electrical fault.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows
"Demo"
.
The demo mode is activa-
ted.
1. Deactivate the oven.
2. Touch and hold until
the oven activates and
deactivates.
3. Touch and hold
and
at the same time un-
til an acoustic signal
sounds and
"Demo"
goes out.
12.2
Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
13.
INSTALLATION
WARNING!
Refer to Safety chapters.
13.1
Lifting the appliance
To lift the appliance, do not use the door
handle.
www.electrolux.com
20
Содержание EBGL40CN
Страница 1: ...EBGL40CN EBGL40SP EN OVEN USER MANUAL ...
Страница 26: ...www electrolux com 26 ...
Страница 27: ...ENGLISH 27 ...
Страница 28: ...www electrolux com shop 867314706 C 132017 ...