Display
1
Minute minder function indicator
2
Meat probe indicator
3
Time display
4
Clock indicator
5
Button "
+
"
6
Button "
-
"
Minute minder function
This function does not affect oven operation.
Setting the minute minder function
1. Push the + or - button.
2. Set the time with + or - button (maximum time is 2 hours 30 minutes).
3. After 5 seconds the clock starts to count down.
4. When time finishes press any key to switch off the signal.
Meat probe
Meat probe measures the core temperature of the meat.
There are two temperatures to be set:
• The oven temperature: See Roasting Table
• The core temperature: See Meat probe Table
Only use the meat probe supplied or genuine replacement parts
WARNING!
The meat probe is hot! Risk of burns! Be careful when you remove the tip and plug of the
meat probe.
Using the meat probe:
1. Insert the meat probe plug into the socket in the side wall of the oven. Meat probe
indicator
flashes.
2. Insert the meat probe point in the middle of the meat, as far as it goes.
3. Use "
+
" or "
-
" buttons to set the core temperature. You can set the temperature from
30 °C to 99 °C.
Refer to values in the table.
4. Use control knobs to set the oven cooking function and temperature.
5. You will hear electronic signal when the meat reaches core temperature. To stop it press
any key.
6. Switch off the oven and remove the meat probe.
1 2
3
5
6
4
8
Daily use
