Electrolux E43042-6, Руководство пользователя

Страница: 21 / 28

Folding down the heating element
1. Remove the shelf support rails.
2. Hold the heating element with the two
hands at the front
3. Pull it forwards against the spring pres -
sure and out along the support on both
sides.
4. The heating element folds down.
The oven ceiling is ready to clean.
Installing the heating element
1. Install the heating element in opposite
sequence.
Install the heating element correctly on the two sides above the support on the inner wall
of the oven.
2. Insert shelf support rails.
Shelf Support Rails
Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away from
the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
Important!
The rounded ends of the shelf support rails must point to the front!
Telescopic shelf runners
To insert the telescopic shelf runners, first remove the shelf support rails (refer to “Removing
the shelf support rails”).
2
1
Care and cleaning 21