E3
MICROWAVE WALL OVEN INSTALLATION INSTRUCTIONS
REMOVING OVEN FOR SERVICING
ANTI-TIP BRACkET INSTALLATION
FINISHED ANTI-TIP BRACkET INSTALLATION
Anti-Tip Bracket
installed in cabinet
Oven removed
from the cabinet
Oven
Bracket
released
Cabinet
Oven
Right Side
Tool supplied
Anti-Tip
Bracket
Anti-Tip Brackets
16-1/2"
(41.9 cm)
Cutout Width
(See dimensions below)
30-INCH MICROWAVE
Cutout Width
27-5/8" (70.2 cm) Min.*
28-1/8" (71.4 cm) Max.*
27-7/8" (70.8 cm) Recommended*
30-INCH CONVECTION
Cutout Width
28-1/2" (72.4 cm) Min.*
29" (73.7 cm) Max.*
28-3/4" (73.0 cm) Recommended*
27-INCH MICROWAVE
Cutout Width
25-1/8" (63.8 cm) Min.*
25-5/8" (65.1 cm) Max.*
25-3/8" (64.5 cm) Recommended*
Cutout Height
21" (53.3 cm) Min.*
21-1/2" (54.6 cm) Max.*
Figure 4
Figure 5
Figure 3
MICROWAVE WALL OVEN INSTALLATION
Two persons are required to install the oven.
Never
hold the door handle when moving the oven.
Place the oven adjacent to the opening on a table or
3.
stand. Plug the power supply cord into the electrical
outlet. Carefully guide the oven into the prepared
opening. Avoid pinching cord between oven and wall.
See Figure 4. Push the unit in and against the cabinet.
The oven side bracket will clip into the Anti-Tip brackets.
See Figure 3.
To pull out the oven for servicing, open the door and
4.
locate the two holes on the side frame. Simultaneously
insert the tools provided with the appliance in both
holes and pull the oven towards you. See Figure 5.