22
Automatic Ice & Water Dispenser
PRIMING THE WATER SUPPLY SYSTEM
Your refrigerator’s water supply system includes several tubing lines, an advanced
water filter, a distribution valve bank, and a reserve tank to ensure ample supply to
the ice and water dispenser at all times. This system needs to be completely filled
with water when first connected to an external supply line.
To prime the water supply system:
1
Begin filling the tank by pressing and holding a drinking glass against the
water dispenser paddle.
2
Keep the glass in this position until water comes out of the dispenser.
It may
take about 1½ minutes
.
3
Continue dispensing water for about 3 minutes to flush the system and
plumbing connections of any impurities (stopping to empty the glass as
necessary).
!
CA
CA
CA
CA
CAUTION
UTION
UTION
UTION
UTION
For proper dispenser operation, recommended water supply pressure should fall between
20 psi and 100 psi. Excessive pressure may cause water filter to malfunction.
NO
NO
NO
NO
NOTE
TE
TE
TE
TE
The water dispenser has a built-in device that shuts off the water flow after 3 minutes of
continuous use. To reset this shutoff device, simply release the dispenser paddle.
!
CA
CA
CA
CA
CAUTION
UTION
UTION
UTION
UTION
Pushing the dispensing paddle in for more than 4 minutes may cause the dispenser motor
to overload and stop. The overload protector resets automatically after 3-4 minutes.
