Air flow direction adjustment
Use SWING to adjust the airflow direction up and down.
1. When swing is pressed the horizontal louver moves up and down
automatically. Press again to stop operation
If the louver oscillates or moves in a position that could affect the cooling or
heating of the air conditioner the direction of the oscillation/movement would
alter automatically.
41 electrolux
how the air conditioner works
Timer operation
1. Press the TIMER button as required. The current timer setting is displayed
alongside either the TIMER ON or TIMER OFF indicator, and will flash.
2. Press or to set the desired time. Each time you push the button, the time
moves forward or backward by 10 minutes depending on which direction you
press. The time alters as quickly as you press the button.
3. After setting the timer for TIMER ON and TIMER OFF, check the TIMER
indicator on the display panel of the indoor unit is illuminated.
4. After the timer has been set, there will be a half a second delay before the
remote control sends the signal to the air conditioner. Approximately 2
how the air conditioner works
electrolux 42
Time
DRY Function
Room
temperature
Set temperature
o
C
o
l
o
C
o
l
o
C
o
l
F
a
o
nl
y
n
nl
F
an
o
y
DRY operation
The dry mode will automatically select
the drying operation based on the
difference between the set
temperature and the actual room
temperature.
The temperature is regulated while
dehumidifying by repeating turning on
and off of the cooling operation or fan
only. The fan speed is LOW.
1. Push the MODE button to select
DRY.
2. Push the TEMP button to set the
desired temperature from 21ºC to
28ºC.
3. Push the ON/OFF button, the
operation lamp lights and the air
conditioner start to operate in the
DRY mode. FAN SPEED is Low.
Push the ON/OFF button again to
stop this unit operation.
Due to the difference of the set
temperature of the unit and the
actual indoor temperature, the Air
Conditioner when in DRY mode will
automatically operate many times
without running the COOL and FAN
mode.
SLEEP mode
Press the sleep button to activate the
sleep mode. To deactivate, press the
button again.
Cool only mode:
• The indoor unit fan operates at a
low velocity.
• After and hour of operation, the
adjusted temperature will increase
1º C. After, the unit keeps
operating 2ºC above the adjusted
temperature.
In heating mode (some models):
• The indoor unit fan operates at a
low velocity.
• After and hour of operation, the
adjusted temperature will decrease
1º C. After, the unit keeps
operating 2º C below the adjusted
temperature.
1 °C
1 hour
1 hour
S
e
t
te
m
p
e
ra
tu
re
SLEEP FUNCTION (Cooling mode)
1 °C
1 °C
1 hour
1 hour
SLEEP FUNCTION (Heating mode)
7 hours
1 °C
S
e
t
t
e
m
p
e
ra
tu
re
Sleep function is only availaible in the
Cool/Heat and AUTO mode.