14
Getting Started
When the unit is first plugged in, or when the power supply to the range has been interrupted,
the timer in the display will flash with
"12:00"
. The clock cannot be set when the oven is on.
If an invalid time of day is entered, the control will triple beep to prompt you to re-enter a valid
time of day.
To set the clock (example for 1:30):
1.
Press
1 3 0
pads to set the time of day to 1:30. The pads
+
hi
or
-
lo
can also be pressed
to raise or lower the actual time displayed.
2.
Press
START
to accept the changes or
CANCEL
to start with a time of 12:00.
SETTING CLOCK AT POWER UP
CONTROL PANEL DISPLAY MODES
Sleep Mode:
Your control will remain in a sleep mode when not in use. Only the clock will display during this
mode. You will need to wake the control to begin any function.
Wake Mode:
To wake the control, touch within the display panel. After 2 minutes without activity the control
will beep and go back into sleep mode.
To start a cooking feature you must select either the upper oven or the lower oven. User
preferences will be available during this mode as well as timers, oven light and the control lock.
TEMPERATURE VISUAL DISPLAY
Your oven is equipped with a temperature visual display for each oven. When a cooking mode
is set, the actual temperature will be shown in the display and will rise as the unit preheat. When
the unit has reached its target temperature, a chime will sound to remind you to place the food
in the oven. This feature will be active with some cooking modes; bake, convection bake,
convection roast and perfect turkey. The cooking modes which does not feature the
temperature visual display will be noted in their descriptions.
NOTE: The lowest temperature that can be displayed is 100°F.
Содержание Dual Fuel Slide-In Range
Страница 1: ...318 203 869 0710 Rev A Use Care Guide Dual Fuel Slide In Range ...
Страница 53: ...53 Notes ...