background image

6

The Control Panel

6  Super Rinse button 

By depressing this button on programmes for cottons and
linens the machine will perform an additional rinse.
This is recommended for people who are allergic to
detergents and in areas where the water is very soft.

7  Rinse Hold button

Press this button to make the machine stop with water in
the drum after the last rinse.
This prevents any creasing which may occur if the clothes
are left damp in the drum. When it is convenient for you
to empty the machine, simply press this button again so
that the machine can proceed to drain and spin, or turn the
dial to the drain programme “

R

”.

If this button is not activated, the washing programmes
will end with a spin.

Important!

This button is not compatible with the automatic washing
& drying programme.

8 ON/OFF button 

By depressing this button the machine starts operating.
When depressing it again, the machine stops.
The push button is provided with a child-proof safety
lock. Move the small slider placed in the middle of the
button downwards to lock the button in the «off» position.

9 Mains-on light

This light will illuminate when the machine starts working
and goes out when the ON/OFF button is depressed again
to switch the machine off.

10 Programme selector dial

With the 

programme selector dial 

you choose the 

desired washing and drying programme. 
Turn it 

clockwise

.

Depress the dial to pop it out.
Before setting the dial to any position the machine must
be switched off by depressing the ON/OFF button.

1 Detergent dispenser drawer

2 Drying indicator light

This light illuminates when  the machine is drying.

3 Drying time selector dial 

Graduated up to 120 mins for cottons and synthetics, this
dial allows you to select the desired drying time according
to the type and quantity of laundry and the required degree
of dryness:

Blue sector

for cottons

Green sector

for synthetics

Turn the dial 

clockwise

only.

Depress the dial to pop it out.

Cooling phase

To allow the laundry to cool down, a cooling phase starts
automatically 10 minutes before the end of drying and this
phase must in no circumstances be reduced or interrupted.

4 Spin speed reduction button 

By depressing this button the spin speed is reduced as
follows:

-  cotton & linen: from 1200 rpm to 650 rpm;
-  synthetics and wool: from 850 rpm to 650 rpm.
-  delicates: from 650 rpm to 450 rpm.

Important!

In order to save energy and to avoid too long drying times
we suggest not to reduce the spin speed when you wash
and dry automatically.

5  Quick wash button 

By depressing this button on programmes 

A, B, C, D

and

H

the wash time is reduced.

This is suitable only for garments which are lightly soiled.

1

2

3

4 5 6 7 8 9

10

EWD 

1214 

I

1000

132984350.qxd  20/07/2005  11.02  Pagina  6

Содержание aqualux EWD 1214 I































Отзывы: