17
Troubleshooting
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Noises
• Detergent cup opening\
Drain pump sound.
• A hard object has entered
the wash module. When
the object is ground up,
the sound should stop.
• This is normal.
• If the noise persists after a complete
cycle, call for service.X
Dishwasher
won’t fill with
water
• Water valve is turn off.
• Door latch may not be
properly seated.
• Check if the water valve is turn on.
• Make sure the door is closed.
Error codes
Error codes will display on the display window when the following errors occur:
CODE
MEANING
POSSIBLE CAUSES
i1
Longer inlet time
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
i4
Unit leaking
Some element of dishwasher leaks.
id
PCB communication error
PCB issue, or wire connected to the board
issue.
CAUTION
• If overflow occurs, turn off the main water supply before calling a service provider.
• If there is water in the base pan because of an overfill or small leak, the water
should be removed before restarting the dishwasher.
Содержание A15931301
Страница 19: ......
Страница 20: ...electrolux com shop ...